Advantages of cleaning technology of high pressure washer

The high-pressure cleaner is a high-efficiency high-pressure cleaning pump and energy-saving cleaning equipment. It is used for cleaning heat exchangers or reactors and various pipelines in chemical plants, thermal power plants, sugar factories, paper mills, etc., and can also be used for casting sand removal , All kinds of vehicles, airplanes, ships, slaughterhouses, etc. can be cleaned by water and sandblasting after being equipped with accessories, and then the high-pressure cleaning pump can be used to suppress the environmental pollution caused by air spraying, affecting personal health and other defects, in order to improve environmental protection The job conditions are clear.

Advantages of the cleaning technology of the high-pressure cleaner:

(1) Good cleaning quality

When the high-pressure water jet cleans the pipe and the inner hole of the heat exchanger, it can remove all the fouling and blockages in the pipe, and the metal body can be seen. The high-pressure water jet with huge energy and supersonic speed can damage hard scales and obstructions, but it has no damaging effect on metals. At the same time, because the pressure of high-pressure water is lower than the compressive strength of metal or reinforced concrete, high-pressure water jet cleaning will not harm the substrate to be cleaned.

(2) Fast cleaning speed

Due to the composite crushing action of water jet, such as scouring, wedge splitting, shearing, grinding, etc., it can quickly smash and wither the scales, which is faster than traditional chemical methods, sandblasting methods, simple mechanical and technical methods. Several to ten times. At the same time, the parts cleaned by high-pressure water jets are selected, and there is no need for intermittent secondary cleaning treatment; and after chemical cleaning, clean water needs to be used to clean the surface chemicals.

(3) No environmental pollution

Because high-pressure water jet cleaning uses clean water as the medium, water jet cleaning does not generate a lot of dust like sandblasting and simple mechanical cleaning, which pollutes the atmosphere and endangers human health; it does not generate a lot of waste like some chemical cleanings. Liquid pollutes the river, soil and water quality. The water jet with clean water as the medium is odorless, tasteless and non-toxic. After the sprayed jet is atomized, it can also reduce the air dust concentration in the work area, lowering it below the safety standard of the national regulations, so it will not cause any pollution. In addition, the recovery of the high-pressure water jet cleaning fluid is technically relatively simple to end.

(4) Wide application range

High-pressure water jet cleaning can clean the parts with messy appearance and structure, and can be cleaned intermittently under the conditions of narrow and messy space and poor operating environment. There are no special requirements for equipment materials, characteristics, appearance and types of scales. Only direct injection is required. , So its use is very wide.