Application Of High Pressure Cleaner in Industrial Cleaning Field
The cleanliness of industrial equipment directly affects the operation and efficiency of industrial equipment, so industrial cleaning is particularly important. The working medium of the high-pressure cleaner is clean water without adding any chemical agents. The attachment is removed. Therefore, the application range of high-pressure cleaners is very wide, covering almost every field of the national economy. Below high are typical examples of the application of high-pressure cleaners in casting sand removal, descaling, and airport runway glue removal, as well as the pressure and flow parameters used in common engineering cleaning.
1. Casting sand cleaning: In the casting sand cleaning operation, it is most suitable to choose a high-pressure cleaner with a working pressure of 600bar and a flow rate of about 30L/min. machine.
2. Pipeline descaling: In the pipeline descaling operation, a high-pressure cleaner with a working pressure of 750bar and a flow rate of about 50L/min is most suitable.
3. Airport runway degumming: In the airport runway degumming operation, it is most suitable to choose a high-pressure cleaner with a working pressure of 750bar and a flow rate of about 50L/min. The plane rotator is preferred, which can greatly improve the cleaning efficiency.
4. Derusting of mechanical parts: In the derusting operation of mechanical parts, a high-pressure cleaner with a working pressure of 200bar and a flow rate of about 20L/min is selected. The high-pressure water output end of the high-pressure pump is equipped with a mixed abrasive tank before use. Mixed abrasive water jet for rust removal operation.
5. Steel rust removal: In the steel rust removal operation, a high-pressure cleaner with a working pressure of 500bar and a flow rate of about 38L/min is selected, and it is equipped with a sandblasting device. The post-mixed abrasive water jet is used for the rust removal operation.
6. Tube-and-tube heat exchanger: In the cleaning operation of tube-and-tube heat exchanger, a high-pressure cleaner with a working pressure of 750bar and a flow rate of about 50L/min is most suitable.
7. Boiler: In the boiler cleaning operation, it is most suitable to choose a high-pressure cleaner with a working pressure of 750bar and a flow rate of about 50L/min.
8. Sewers: In the cleaning of sewers, it is most suitable to choose a high-pressure cleaner with a working pressure of 280bar and a flow of about 74L/min. The rotating nozzle is preferred, which can greatly improve the cleaning efficiency.
9. Oil tanks and tank trucks: In the cleaning operations of oil tanks and tank trucks, it is most appropriate to choose a high-pressure cleaner with a working pressure of 800 bar and a flow rate of about 84L/min, and to equip it with a three-dimensional rotating nozzle to achieve 360° full coverage式Cleaning.
