Application Of High-pressure Cleaners in Urban Development And Industry

The main application and function of high-pressure cleaners in urban development are reflected in the cleaning of pipes, heat exchangers, and boiler pipes. The most used in these projects is the high-pressure cleaner. Next, I will give you a brief introduction to the application of high-pressure cleaners:

1. Pipe cleaning machine General water and sewage pipes with a diameter of 150～500mm, timely cleaning of the pipes can alleviate the blockage and corrosion of the pipes caused by the accumulation of urban garbage at any time, and can make the pipes truly reflect its value

2. Heat exchanger cleaning machine

Heat exchanger is a kind of equipment for thermal energy conversion and waste heat utilization, which is widely used in industrial fields such as chemical plants, power plants and petrochemical enterprises. Some large enterprises have dozens or even hundreds of heat exchangers in one production base. As the cooling water absorbs the heat of the cooling water during the heat exchange process, the temperature rises. At this time, the Ca(HCO3)2 and Mg(HCO3)2 originally dissolved in the water will precipitate CO2 under the action of temperature. CaCO3 and MgCO3 soluble in water. Since the solubility of CaCO3 and MgCO3 decreases with increasing temperature, they crystallize out of water. When these crystals are continuously deposited on the surface of the heat exchanger, a very hard scale is formed, which not only affects the heat exchange efficiency, but also increases Energy consumption, in severe cases, the cooling water will be shut down due to insufficient cooling water flow and pressure drop, so the heat exchanger must be cleaned after a period of use.

3. Boiler piping and large tank cleaning machine

Boilers, heating pipes, large tanks and containers will inevitably cause scaling problems after running for a period of time, and the high-pressure water jet has composite crushing effects such as scouring, wedge splitting, shearing, and grinding, which can immediately break the fouling off. And wash away, so as to realize the separation of scale layer and pipe wall. Therefore, the high-pressure cleaner is the most ideal cleaning equipment. When the high-pressure water jet cannot be directly injected, supplemented by chemical methods, its economic benefits are roughly equal to the above.