Cleaning Machine Operating Procedures

Prelude

Check the piping system for air leakage and water leakage. If this happens, notify the maintenance personnel to repair it. Check whether the cleaning fluid is sufficient, if not enough, increase the cleaning fluid in time. Start the test run first, and then dry it for 2-3 minutes. Check whether the transmission system (motor, coupling, reducer) and the conveyor belt are moving smoothly. After confirming that everything is normal, production can be started. Turn on the slick oil removal device (except without the slick oil removal device) to start the oil slick removal, so the water pump is still on, the water surface is calm, and the oil drain effect is good. After the slick oil is basically removed, the oil removal will be stopped. get on.

Operation matters

The cleaned parts should be neatly placed on the conveyor belt and must not be pressed on the rollers; on the conveyor belt, the cleaned parts should not be piled too much, so as not to affect the cleaning effect. After working, the cleaned parts cannot be parked on the conveyor belt. Press the stop button to stop the whole machine. Cleaning machine cleaning machine A machine that uses different methods to clean packaging containers, packaging materials, packaging aids, and packaging to achieve the expected cleanliness. The cleaning fluid should be regularly added with water and a certain proportion of metal cleaning agent to supplement the consumption and keep the liquid level at a certain height. If the cleaning effect does not meet the specified process requirements, the cleaning fluid should be completely replaced.