How Do Pressure Washers Perform Pressure Regulation?

When we use high-pressure cleaner equipment, we need to adjust the pressure of the equipment appropriately for different user needs, so as to have a better cleaning effect. So how does the device perform pressure regulation? The following small series will introduce the specific operation steps and methods for you.

1. When adjusting the pressure, the high-pressure washer equipment needs to adjust the appropriate pressure according to the different needs in the running state, and the maximum rated pressure of the equipment should not be exceeded during the adjustment process.

2. When the high-pressure washer equipment is stopped, it is necessary to adjust the pressure regulating valve to the lowest pressure value, so as to avoid the failure and deformation of the pressure spring.

3. When there is a water leakage problem in the safety valve, pay attention to checking whether the pressure of the pressure gauge exceeds the rated pressure value of the equipment. Once it exceeds the rated pressure value, it is necessary to reduce the pressure or check whether the nozzle of the equipment is blocked. In addition, water leakage will also occur when the pressure spring is aging. At this time, the pressure value of the pressure gauge will not exceed the rated pressure value. We need to use an adjustable wrench to tighten the safety valve ejector nut.

The above is the method for adjusting the pressure of high-pressure cleaners compiled by Xiaobian. When we operate the equipment, adjusting the pressure can not only improve the cleaning effect but also reduce the cost of equipment used to a certain extent.