The Pressure Of The Pressure Washer Is Not Enough, How To Solve It?

A Pressure Washer is a machine that uses a power unit to make a high-pressure plunger pump generate high-pressure water to rinse the surface of an object. It can peel off and wash away the dirt to achieve the purpose of cleaning the surface of the object. Because high-pressure water jets are used to clean dirt, high-pressure cleaning is also one of the most scientific, economical, and environmentally-friendly cleaning methods recognized in the world.

1. The pressure of the high-pressure cleaner is not enough for the following reasons:

1. There are generally two reasons for the high-pressure cleaner to discharge water: one is the external reason, and the other is the internal reason.

2. Most of the external reasons are insufficient water supply or blockage of the water supply filter. These are all external reasons and are relatively common reasons.

3. Most of the internal reasons are that the water seal is damaged, the one-way valve is damaged or blocked by foreign objects and cannot be switched normally, the pressure regulating valve cannot regulate pressure normally, the swash plate spring is damaged, etc. These are all caused by insufficient pressure of the high-pressure cleaner. main reason.

Second, the solution to the insufficient pressure of the Pressure Washer：

1. According to external reasons, our effective solution is to increase the pressure of water supply. If the water supply is insufficient, then we can find a water-filled container to store water to ensure sufficient water supply.

2. If the filter is clogged, then we need to remove the filter for cleaning, if the filter is damaged, then we need to replace a new filter.

4.According to the internal reasons, our solution is to carefully check each part of the high-pressure cleaner. After the repair is completed, it will continue to be damaged, so everyone simply replaces some damaged parts.