What High-pressure Cleaner Should Be Used To Clean The Condenser?

Power plants use many condensers to condense the steam discharged from the turbine because most of the cooling water contains calcium, magnesium ions, and acid carbonates. When cooling water flows over the metal surface, carbonates are formed. In addition, the oxygen dissolved in the cooling water can cause metal corrosion and form rust. Due to the generation of rust, the heat exchange effect of the condenser is reduced. In severe cases, cooling water has to be sprayed outside the shell. In severe cases, the tube will be blocked and the heat exchange effect will be lost.

Research data shows that scale deposits have a huge impact on the loss of heat transfer, and the increase in deposits will increase energy costs. Even a thin layer of scale will increase the operating cost of the scaled part of the equipment by more than 40%. Keeping the cooling channel free of mineral deposits can improve efficiency, save energy, extend the service life of the equipment, and save production time and costs.

The condenser high-pressure cleaner can use the impact of the water flow to remove the dust and dirt in the condenser. The characteristics of the condenser high-pressure cleaner are easy to operate, high inefficiency, and is fast and clean, and the pressure can be adjusted. There is no second pollution. Many power plants choose a high-pressure washer of about 500 kg to clean the condenser. If the pressure is not enough, it can be adjusted.